INSTRUCTIONS:
1) Remove rubber boot (11) and circlip (10).
2) Carefully remove internal components.
3) Replace the following. (making sure all seals have been lubricated with brake fluid). Primary seal (4), Piston Washer (5) and the Secondary Seal (7). (Care must be taken when assembling seals as damage maybe caused).
4) Check bore is free from debris.
5) Lubricate bore with brake fluid.
6) Re-assemble internal components into body.
7) Use new circlip (10) to secure internal components and new boot to protect from debris (11).
Ref. |
Description |
Included in Repair Kit. |
1. |
Body |
No |
2. |
Spring Guide Pin |
No |
3. |
Master Cylinder Return Spring |
No |
4. |
Primary Seal |
Yes |
5. |
Piston Washer |
Yes |
6. |
Piston |
No |
7. |
Secondary Seal |
Yes |
8. |
Push Rod |
No |
9. |
Piston Stop Washer |
No |
10. |
Circlip |
Yes |
11. |
Boot |
Yes |
Universal Repair Kits |
Cylinder Bore Size |
Part Number |
Use With Cylinders |
14.0mm (0.551") |
CP2623-88RK |
CP2623
CP4623
CP4400
CP5623
CP6093 |
15.0mm (0.590") |
CP2623-89RK |
15.9mm (0.625") 5/8" |
CP2623-90RK |
16.8mm (0.661") |
CP2623-905RK |
17.8mm (0.70") |
CP2623-91RK |
19.1mm (0.75") 3/4" |
CP2623-92RK |
20.6mm (0.812") 13/16" |
CP2623-930RK or
CP2623-930PRK |
22.2mm (0.875") 7/8" |
CP2623-94RK |
23.8mm (0.937") 15/16" |
CP2623-95RK |
25.4mm (1.00") |
CP2623-96RK |